CLOSED CELL FOAM AND SPONGE MATERIALS
|
6  |
6 NEOPRENE/SBR/EPDM
SCE 41 - SOFT DENSITY
Lower Closure Force Gaskets
Weatherstripping
Cushioning
GENERAL PROPERTIES
Density(PCF) 4-8
Tensile(PSI) 75
Color - Black
Temp Range(F) -40 to 200
Max. Water Absorption 5%
|
11  |
11 PVC FOAM-MEDIUM DENSITY
Low Cost Weatherstripping
Air Dust Seals
Conformable
GENERAL PROPERTIES
Density (PCF) 9.0 - 13.0
Tensile (PSI) 35 (min)
Color - Black
Temp Range (F) -68 to 172
Max. Water Absorption 10%
|
7  |
7 NEOPRENE/SBR/EPDM
SCE 42 - MED. DENSITY
Gaskets
Weatherstripping
Door/Enclosure Seals
Cushioning
GENERAL PROPERTIES
Density(PCF) 4-8
Tensile(PSI) 100
Color - Black
Temp Range(F) -40 to 200
Max. Water Absorption 5%
|
12  |
12 PVC FOAM W/MYLAR
Mylar acts as a moisture barrier as well as improves tear resistance.
Gaskets and Seals
GENERAL PROPERTIES
Density (PCF) 9.0 - 13.0
Tensile (PSI) 35 (min)
Color - Black w/clear mylar
Temp Range (F) -68 to 172
Max. Water Absorption 10%
|
8  |
8 NEOPRENE/SBR/EPDM
SCE 43 - FIRM DENSITY
Gaskets
Packaging
GENERAL PROPERTIES
Density(PCF) 7-11
Tensile(PSI) 100
Color - Black
Temp Range(F) -40 to 200
Max. Water Absorption 5%
|
13  |
13 CROSS-LINK POLYETHYLENE
2# Density is most common
Economical Weatherstripping
Thermal Insulation
Cushioning/Packaging
Low Cost Gaskets/Seals
GENERAL PROPERTIES
Density (PCF) 1.8 - 2.2
Tensile (PSI) M=62, CM=40
Color - White and Black
Temp Range (F) -100 to 200
Max. Water .04 lb/sq. ft
|
9  |
9 NEO/PVC/NITRILE IV1
IV1 - SOFT DENSITY
Lower Closure Force Gaskets
Weatherstripping
Economical Alternative to SCE 41(Neoprene Brand)
Applications
GENERAL PROPERTIES
Density(PCF) 3.5 - 5.5
Tensile(PSI) 50
Color - Black
Temp Range(F) -40 to 200
Max. Water Absorption 10%
|
14  |
14 SILICONE FOAM
High Temperature Seals
Medical Applications
Low Compression Set
Superb Flame Resistance
GENERAL PROPERTIES
Density (PCF) 20
Tensile (PSI) 45
Color - Red, Gray, Black
Temp Range (C) -55 to 200
Max. Water Absorption <5%
|
10  |
10 NEOPRENE/PVC/NITRILE IV2
IV2 - MEDIUM DENSITY
Oil Seals
Weatherstripping
Economical Alternative to SCE 42(Neoprene Blend) Applications
GENERAL PROPERTIES
Density(PCF) 5.5 - 7.5
Tensile(PSI) 75
Color - Black
Temp Range(F) -40 to 200
Max. Water Absorption 7%
|
15  |
15 EVA FOAM
Non-slip surface when wet
Pads and Cushions
Medical Grades Available
Toys
Colorable
GENERAL PROPERTIES
Density (PCF) 1.5 - 2.5
Tensile (PSI) 50
Color - Gray, Black, Natural
Temp Range (F) -70 to 160
Max. Water Absorption 10%
|
Material List
Dense Rubber/Matting Materials
